Your MouldKing cover is cut to your exact key, so fitting it takes less than a minute. Here's how.
1. Check your key version
Before you order, match your fob to the key version shown on the product page (button count and shape). If you're unsure, email a photo to support@mouldkingus.com and we'll confirm.
2. Open the cover
Gently ease the leather cover open along its stitched seam. The leather is firm at first and softens with use.
3. Seat your key
Line up the buttons on your fob with the cut-outs (or raised button pads) on the cover, then press the key in fully so it sits flush.
4. Close and check
Close the cover and press the buttons to make sure each one works cleanly. Every button should click with a light press.
5. Add your keychain
Attach the included leather strap and hardware (swivel hook, carabiner, D-ring or key ring) to the ring at the base.
New leather is snug by design - it moulds to your key over the first few days. If anything doesn't fit right, email us at support@mouldkingus.com and we'll make it right.